what are direct expansion coils and their off coil temperature considerations

Set BCU I mode to 0 (Off - flush, no chilling). 4. Set target temperature ... The temperature of the shim coils (Shim coil temperature) will drop far below 0°C. Storage – No items shall be stored or stacked on building equipment including fan coil units. ... Close blinds to keep the heat out during the summer months and ... A yellow caution LED on the front panel of the Control Package lights when the coil temperature reaches approximately 175°C. ... extremely off center and lead to ... An air source heat pump periodically needs to initiate a defrost cycle of the outside coil to ... 3x in 1 hr Informational. 237. Multi Devices per Ch. Contact ... This publication is for informational purposes and is intended for use as a reference guide. ... Do not push, roll or dump pipe coils or reels off the truck. Once off, the compressor will not normally cycle on until the supply temperature reaches its setpoint and the minimum off ... • Inlet Evap Coil Temperature: The ... In others, auxiliary heat is used to warm up the cold air coming off the evaporator coil. ... Contact your local Trane office for more information or visit www. Oct 1, 2023 ... NOTE: Indicates important details or clarifying statements for information presented . ... coil temperature sensor input is either out of range or ... ON / OFF to maintain the required temperature and pressure for the selected ... informational messages (time & temp., error codes, etc.) appear on the ... For information on tickets, performances, programs, parking, restaurants, or anything else having to do with your MSO experience, call the MSO Box Office at ...