What are the limitations of using S/PDIF input on an AV receiver compared to HDMI or other digital formats

A serial interface for transferring digital audio from CD and DVD players to amplifiers and TVs. S/PDIF is typically used to transmit PCM and Dolby Digital 5.1. Actually supports sampling rate at 192kHz 24bit. 1 x 192kHz Optical to RCA Cable (2.1m/7ft）. One RCA output interface to be connected to the audio ... Dec 7, 2015 ... SPDIF out of the PC is the worst way to connect up digital audio as the signal is clocked by the PC's hardware; which often results in a lot of digital jitter. Jul 22, 2016 ... But you can use any spdif cable with rca plugs. To select spdif sound you must use a BS5 source in CD mode. Stefan. BEOVOX141. Top 150 ... SPDIF is a digital audio format that uses a single cable to transmit audio signals from a source device to a receiver. This cable is typically an optical fiber ... Jun 9, 2021 ... S/PDIF is often used to transmit compressed audio signals, and it is customized by the IEC 61937 standard. It is often used in home DVD theaters ... Nov 12, 2019 ... Both use S/PDIF as the content transfer format to send up to 5.1 multi-channel audio. Whether one can hear a difference between them is ... Aug 29, 2013 ... The biggest problem is that 90% of the times, after startup, I get no sound out of the main out. The routing is correct and the output LED is blinking. Jun 12, 2006 ... When a sound is played, it takes a few milliseconds for the receiver to wake up. A utility called "SPDIF KeepAlive" works around the issue by ... ... SPDIF, ADAT, MADI. 12. lecture: Sound-system technique: microphones, mixing consoles, effects, loudspeakers, monitoring, recording. Channel and master ...