Are there any techniques or technologies used to minimize jitter in S/PDIF systems

Feb 10, 2021 ... ... SPDIF or USB factor in. Let's start with SPDIF, where jitter is more understandable. SPDIF data stream has clock embedded to it and if ... Nov 27, 2017 ... Depends on the port - if its an optical, you need TOSLINK, while if like COAX, you need RCA cables. Secondly, digital aspect of sound - I find ... Mar 8, 2024 ... SPDIF gives you a latency free connection to the other interface. It's limited since it's only 2 channels, but otherwise avoids a round of D/A and A/D ... May 16, 2018 ... S/PDIF optical or coax interface allow direct digital audio to be sent from the PC to the amplifier/speaker, removing any electromagnetic ... Jun 12, 2006 ... When a sound is played, it takes a few milliseconds for the receiver to wake up. A utility called "SPDIF KeepAlive" works around the issue by ... SPDIF is a digital audio format that uses a single cable to transmit audio signals from a source device to a receiver. This cable is typically an optical fiber ... May 26, 2020 ... I chose restore default on settings mode and it sounds worse now. & the volume is really soft. So I came across SPDIF mode & don't know if I ... Jan 24, 2002 ... S/PDIF (Sony/Phillips Digital Interface Format... or some such) is the connection type you use, to listen to an AC-3 (Dolby Digital, DTS, etc) ... May 27, 2013 ... SPDIF = Sony Phillips Digital Interface, Its a connection / audio transport model to send "Digital" audio from one device to another. Jan 27, 2019 ... You try connecting another device with a SPDIF input in place of the receiver, and see if it has the same problem, or switch between electrical ...