What are the trade-offs involved in using RIP in these scenarios? What are the steps involved in troubleshooting a routing loop in a RIP network?

RIP is a routing protocol typically used as an Interior Gateway Protocol (IGP). RIP uses hop counts only to determine the shortest path to a destination. Dec 16, 2009 ... RIP is a dynamic routing protocol. Unless you have multiple routers you need to distribute routes to there really isn't any reason to run it ... RIP will automatically summarize routes to the classful boundary by default. For example, if you've got an interface with IP address 192.168.10.1/30, and under ... Routing Information Protocol (RIP) ... The Routing Information Protocol (RIP) provides the standard IGP protocol for local area networks, and provides great ... RIP is based on UDP and uses port 520 for route updates. By limiting routes to a maximum of 15 hops, the protocol helps prevent the development of routing loops ... RIP is an interior gateway protocol (IGP) that uses a distance-vector algorithm to determine the best route to a destination, using the hop count as the metric. Routing Information Protocol. Routing Information Protocol (RIP) is a distance-vector routing protocol. Routers running the distance-vector protocol send all or ... Jun 2, 2013 ... I try to add addresses for dynamic routing using the RIP protocol, for Router 1 adding 172.16.1.0 and 172.16.3.0 and for Router 2 172.16.3.0 and 172.16 May 25, 2006 ... ... RIP, the Routing Information Protocol. RIP, like all routing protocols, is designed to disseminate network information pertinent to routers. RIP, EIGRP and OSPF are all interior gateway protocols (IGP) while BGP is an exterior gateway protocol (EGP). Basically, interior protocols are meant to ...