Is RIP an IGP or an EGP?

RIP is a distance vector protocol that uses hop count as its primary metric. RIP defines how routers should share information when moving traffic among an ... Dec 20, 2016 ... The way distance vector routing protocols share routing information makes them vulnerable to problems like counting to infinity. Split horizon ... RIP (Routing Information Protocol) is an old distance vector routing protocol. It uses a hop count as its metric, which is limited to a maximum of 15 routers. RIP, EIGRP and OSPF are all interior gateway protocols (IGP) while BGP is an exterior gateway protocol (EGP). Basically, interior protocols are meant to ... Nov 18, 2017 ... How to Configure RIP Routing Protocol on Juniper and Cisco Routers · [edit] root@J1# set interfaces ge-0/0/0 unit 0 family inet address 172.28. Jan 29, 2024 ... RIP (Routing Information Protocol) ... Routing Information Protocol (RIP) is one of the oldest and most straightforward interior gateway protocols ... Apr 27, 2024 ... RIP is a distance-vector routing protocol, which means that each router in the network maintains a table of distances (or hop counts) to every ... Aug 1, 2024 ... Distance Vector Routing Protocol, RIP uses this to find the best path to a destination, ensuring the shortest route. ; Maximum Hop Count Limit ... RIP is a distance vector (DV) routing protocol, using UDP packets for exchanging information through port 520. RIP uses a hop count to measure the distance to ... Distance vector protocols are susceptible to routing loops. Routing loops occur when a packet is continually routed through the same routers over and over ...