What are some examples of "safety by design" principles that can be applied to ladders and work at height to reduce the risk of falls due to incorrect angles?

Table 1 instructions the competent person what to inspect. Table 1: Ladder Inspection Criteria. When the ladder is: Do the following: First Placed into service ... May 24, 2024 ... As the soil type and stability decreases, so should the slope angle. ... Keep surcharge loads (any load that could put extra pressure on ... Aug 23, 2022 ... Technical Information. Ladder ... proper distance form the wall for placing the foot of the ladder. If ladders are set up at a steeper angle ... May 23, 2011 ... The 30-lb ladder is placed against the wall at an angle ... Cookie NoticeYour Privacy ChoicesDo Not Sell My Personal InformationGeneral Policies ... GENERAL LADDER INFORMATION. Ladder ... To ensure safety, ease of climbing, and to support the greatest weight, ladders should be placed at the proper angle. If you must use a ladder, before you start work: conduct a hazard identification and risk assessment; ensure that the ladder has an angle or pitch of about 1:4 ... Nov 30, 2011 ... 3.2. The length of the accommodation ladder should be sufficient to ensure that its angle ... should be situated at a position which will ... Non-self-supporting ladders should have a set-up angle of 75.5 degrees to the horizon unless instructed otherwise by the ladder manufacturer. When set at this ... The LadderM8rix must be set up on an even, ... Make sure you have placed the LadderM8rix at a position which allows the ladder to be placed at an angle of 1 in 4. See Appendix D for additional information. How to use an extension ladder: • Make sure the extension ladder is set up at a 4:1 angle with secure footing on ...