show etherchannel port-channel

Jan 24, 2008 ... A Cisco router can be configured to act as DHCP client and obtain dynamically an interface address by using the command ip address dhcp in interface ... Prior to Release 12.2(8)T, the ip address dhcp command was only supported on Ethernet interfaces. Discussion. Cisco started to include DHCP client functionality ... Configure Cisco router as a DHCP client. Cisco routers can be configure as both DHCP servers and DHCP clients. An interface on a router that connects to the ... Configuring a Cisco router to act as a stateless DHCP server is very straightforward. There are two basic steps: ... Let's configure step 1. The first command ... The sntp unicast client enable Global Configuration mode command enables the device ... The sntp server Global Configuration mode command configures the device to ... (Optional) Specifies a hardware address for the client. This command is used for BOOTP requests. Step 7. client-name name. Example: Router( ... (Optional) Configure one or more routers as the default gateway on the client's subnet: content_copy zoom_out_map. [edit] user@switch# set access address ... Enter Configuration Mode on a VA Deployed in Azure, AWS, or Google Cloud Platform. A VA can be deployed in Azure with either a static IP address or a DHCP IP ... ... switch for configuration and monitoring via a command line interface (CLI). Note: An IPv4 address for this switch is obtained via DHCP by default. To change. Configure DHCP to distribute IP address and other DHCP options to clients that connect to the network. Configure ACLs to shore up security and restrict incoming ...