What are some applications where magnetizing current is a significant factor?

This relationship between the B and H is represented by the B-H curve of the material. The magnetizing force (H) is equal to the product of magnetizing current ... The knee point is defined as the voltage at which a 10% increase in applied voltage increases the magnetizing current by 50%. – ∇×M is a “magnetization current density” also due to bound charges, an effect that we will discuss and clarify later in this section. Using these expressions ... decoupling strategy is decoupled in terms of magnetizing current instead of stator current to alleviate the effects of core loss. The performances of ... The method is based on magnetization current, harmonic content and power factor evaluated of the transformer no-load current with high magnetic flux density ... This is the current required to produce flux in the core. It consist of two different current component 1. Magnetization current, required to produced the flux ... As the sinusoidal input voltage transitions from positive to negative, the magnetizing current will respond in kind, driving the flux density developed in the ... I am referring to Half-Bridge SMPS transformers for switching frequency = 111KHz. I wish to know if LTSpice will have the primary current as a magnetising ... The core loss current, the magnetizing current and the total exciting current at 25 cycles for transformer F are shown in Fig. 12, and the same quantities ... Jul 13, 2020 ... On resolving the magnetizing current wave into a series of component sine curves, it is equivalent to a sine wave of a fundamental frequency and ...