Why is ERH important in desiccant selection

Unlike a refrigerant unit, the desiccant does not need the temperature in the room to be warmer, so they are more effective in colder temperatures, typically 15 ... The F-PAC is a custom designed high capacity desiccant pack used for keeping your filament dry. Contains approximately 2.5 lbs (1130 grams) of desiccant. Mar 15, 2023 ... Some people have said desiccant is better for lower temps, but would 12-15 be considered low? I've been told a compressed dehumidifier wouldn't work in these ... Oct 8, 2024 ... A compressor dehumidifier is suitable for a room with an air temperature above 10°C, and a desiccant dehumidifier is more suited for temperatures below 10°C. Jul 8, 2023 ... Many desiccant packs can be easily dried within a few minutes in the microwave. Here's a 50 gram (52 grams including the porous bag) pack that's taken on 12 ... Dec 1, 2022 ... If you have moisture, or frost forming on your sensor or inside the sensor chamber, it's time to either recharge or replace the desiccant. Dec 6, 2019 ... I use a liquid floatant made from lighter fluid and mucilin paste. Floats the fly as good as anything else IMO Just one dunk and off you go. May 29, 2024 ... They are air tight. Put 3-5 packet desiccants (1 gram each) into the jerry can. Put a soft dry sponge over it. Leave the HA's overnight, the ... Mar 5, 2024 ... The desiccant can be removed from the condenser without removing the condenser, but the condenser is behind the front bumper fascia. Per the ... Mar 12, 2024 ... Desiccant dehumidifiers are versatile and work well in both cool and warm climates. They are suitable if you live in South Australia, Victoria, New South Wales ...