What kind of stress tests are suitable for BCLK stability testing?

I'm seeing occasional but very severe clock jitter - see blue trace below which displays BCLK, triggered on an abnormally short pulse (<130ns low pulse). Aug 18, 2019 ... The only way that you will get a fully stable BCLK is to use an atomic clock. Quite expensive, and unnecessary overkill. :) sygnus21 said ... 99.773 MHz is a typical BCLK and this usually doesn't vary from idle to full load. Have you tried older versions of CPU-Z to see if any of them report your ... Dec 24, 2020 ... ... Bclk (host clock control) is there too, it may already be visible to you (change away from auto/100 if you see it, this is Bclk) - Enable ... Sep 26, 2023 ... Im trying to use ADAU1401 DSP with chinese PCM5102 DAC module, but i have no sound from PCM. DATA, LRCK, BCLK frequencies+voltages from the ADAU ok. Jan 20, 2023 ... Intel never meant to enable BCLK overclocking on 12th-gen chips, and it hasn't made the same mistake this time around. Dec 16, 2015 ... ASRock releases BCLK OC BIOSes for non K CPUs ... You really should be fine with 4.2 Ghz. I also have a Z170M Pro4S, with a I5-6600K. My CPU ... Sep 5, 2021 ... 11% option caused my BCLK (which was still 100.00 in bios) to be 99.98 static, without any fluctuations to 100.01. 50% and “Enabled” caused my ... Aug 22, 2023 ... On the eval board, BCLK and WCLK are provided through the I2S interface. BCLK is 2.8224MHz (MCLK / 4) and WCLK is 44.1kHz (MCLK / 256). We don't ... Jul 29, 2024 ... Setting BCLK on BIOS does not take advantage of the BCLK Engine: For example, when I set BCLK to 112mHZ in BIOS, computer does not boot.