Can overclocking lead to inaccuracies in system timekeeping?

Sep 3, 2013 ... ... BCLK O.C. result with the trade off of more jitter. Generally speaking High BCLK Mode is only required when targeting for BCLK above 170MHz. Aug 3, 2018 ... This Ask GN discusses #RIPLTT (2), BCLK overclocking vs. multiplier, whether or not motherboards matter, GPU optimization, and more. Jun 19, 2013 ... The first is the BCLK divider (Gear Ratio), these are used to increase the BCLK by a large enough amount to help use lower multipliers ( ... Nov 8, 2012 ... Yes, I fully understand the workings of bclk relationship to CPU & RAM speed as far as what is displayed within utility SW, but I was basically ... Jan 31, 2017 ... BCLK is the reference clock supplied to the CPU, Uncore, memory, PCIe, and DMI buses. Hence, any changes to BCLK will affect the operating frequency and ... 99.773 MHz is a typical BCLK and this usually doesn't vary from idle to full load. Have you tried older versions of CPU-Z to see if any of them report your ... In slave mode, BCLK and. WCLK are inputs to the codec ASI. This relationship might seem straightforward. However, care must be taken when the ASI is configured ... Aug 8, 2012 ... AIC3204 can be configured for 16bit, 20bit and 24bits and since you want to get 8bit data only, depending on the format the controller has to do additional ... May 9, 2013 ... HWiNFO64 v3.96-1660 shows my CPU Base Clock on the sensors page as 100 MHz and my RAM at 1100.0 (2200.0 MHz DDR3) and never deviates. Apr 25, 2023 ... ... (BCLK) is increased. Usually, these chips work quite stably at 5.2 ... BCLK. Accordingly, this also applies to the Core i3-13100F.But ...