What are the key indicators of success in managing private well systems and groundwater resources?

Aug 27, 2013 ... borehole below the bottom of the pitless adapter (See Figure 2B). 12-003.08B-08D Above Ground Protection: Plastic-cCased water wells must be. Nov 29, 2018 ... • Make sure the pitless adapter connection is watertight. The system must implement one of the following corrective actions: • Look at fixing ... pitless adapter – A device placed in the well casing that allows water to be ... Provision of this informational booklet is not intended to make a ... pitless installations. There shall be no bolted connections between the ... Supply shall be non-defective and fit for their intended purposes and shall. ... information on well construction. The well ... Also, older wells may not have a pitless adapter to provide a seal at the point of discharge from the well. AI generated responses are for informational purposes. ... Pump was then checked by sliding the Pitless Adapter from the system and by-passing the pressure switch ... For example, a school or business with its own water supply is considered a non-transient system. ... Pitless Adapter: Y or N. Pitless Adapter: Y or N. Pitless ... LRC Informational Bulletins ... A well casing shall not be cut off or cut into below finished ground surface except to install a pitless well adapter, a pitless ... If pitless adapter used, please note make and model #:. (Note: Pitless adapters must comply with NSF or DOH standards.) Additional information: a. Sanitary ... subject to traffic damage, or in non-complying pits or alcoves, basements or ... When a pitless adapter or pitless unit is installed on a school well or a.